Catalog – Maple Maintenance

Catalog of Preventive and Corrective Maintenance
Bakery Machines and Equipment

Baxter oven

Service to the assembly of the burners.
Manifold assembly service.
Inspection of air exhaust belts
Inspection of the exhaust fan bearings.
Inspection to the CO2 extraction system
Inspection of the door microswitch, trolley rotation and trolley elevator.
Cleaning of the turbine engine and lubrication to the bearings.
Inspection of the hinges, lock, gaskets and seals of the oven doors.
Revision and lubrication to the mechanisms of rotation and elevator of the car.
Cleaning to hood filters and entrance to the ducts.
Cleaning the internal walls and floors of the oven.
Inspection of the clutch and carriage rotation bushings.
Inspection to the sprinkler system for the steam of the oven.
Inspection of the furnace calibration.
Inspection to the electric power system and oven control.

Proofer

Cleaning in condensate collector
Cleaning at the base and protection of the resistances.
Review of the resistances and by measuring electrical current and physical appearance.
Inspection of packaging, seals, lock and hinges of equipment doors.
Review of steam circulation fans.
Inspection of the humidity sensor and maximum temperature.
Revision and cleaning in the water sprinkler system, as well as the electrovalve.
Inspection of the electrical power system and control of the equipment.
Cleaning on walls and internal floors of the equipment.
Mixer Vertical 800, 120 and similar
Cleaning and lubrication in the lifting and lowering guides of the pot.
Cleaning the clutch mechanism, and adjustment check.
Inspection of rotation bands.
Review of the safety of guides, guards and sensors of the machine.
Change of oil in the transmission of the machine.
Revision of the bearings and gears by means of a noise analysis with the mechanical stethoscope.
Inspection of seals and packaging through possible oil leaks.
General cleaning of the machine.
Repair aesthetic machine (paint).
Revision to the electrical system of power and control of the machine.
Engine inspection by current measurement and bearing revision.
Pin inspection and power supply wiring.
Inspection to the wear of blades and horns for the shake.

Rounder (Erika or Rounder)

Inspection of rotation bands.
Lubrication to mechanisms and joints.
Replacement of oil in the lubrication tank.
Cutter calibration inspection.
Review of bearing wear on the mobile table.
Revision of the ignition system, plug and wiring.
Inspection of the motor by monitoring electrical current, and mechanical stethoscope.
Review and / or repair of the aesthetics of the machine.

Bloemhof boot

General cleaning of the machine.
Alignment of conveyor belt.
Lubrication of bearings.
Inspection of connection plug and power wiring.
Review of control keypads
Maintenance to electrical contactor box
Review of control buttons.
Maintenance to electrical contactor box
Review and / or repair of the aesthetics of the machine.
Inspection of the motor by monitoring electrical current, and mechanical stethoscope.

Cinelly mixer and / or ABS

Inspection of transmission bands.
General cleaning of the equipment.
Inspection of rollers and support bearings for the rotation of the pot.
Revision of wear in bearings and mechanisms of the machine by observing the game or vibration of
the machine.
Contactor box and control panel maintenance for equipment control.
Inspection of the connection plug and electrical wiring.
Review of the safety sensor of the equipment.
Inspection of the motor by monitoring electrical current, and stethoscope mechanic.

Turbo Moledor Robot Coupe

Inspection of knives and bearings of the bell.
Inspection of bearings and arrow by vibration and buzz.
Inspection of the motor operation bearings, coals, electronic components, by visualization and
monitoring of electric current.
Inspection of the connection plug and power cord.
Review of microswitch wear and mechanical components of the ignition
Mixer cream blender
General cleaning of the machine.
Aesthetic repair of the machine (painting)
Revision to the electrical system of power and control of the machine.
Engine inspection by current measurement and bearing revision.
Pin inspection and power supply wiring.
Inspection to the wear of pallets and horns for the shake
Inspection and lubrication of bearings, mechanisms and joints.
Cleaning in the variable speed drive by compressed air.
Repair in the aesthetics of the machine.

Machines and Equipment of Butchery and Cremeria

Sierra Hobart

Inspection of plastic and metal guides of the cutting tape.
Inspection of pulley bearings.
Check pulley wear.
Revision of the carriage alignment and its bearings.
Inspection of hinges and doors and covers.
Maintenance to the cut thickness adjustment assembly.
Revision and lubrication of the belt protection guide mechanism.
Inspection of the leveling of the machine through the wear of the bases (legs)
Inspection of the connection plug and the power cord.
Revision of the bearing wear of the transmission through the monitoring with the mechanical stethoscope and possible vibration.
Inspection of the motor by monitoring electrical current and mechanical stethoscope.
Maintenance to the electric meter and ignition mechanism.

Hobart Meat Mill

Inspection to the security system of the machine.
Inspection of the control keypad.
Maintenance to the contactor box.
Oil change to the transmission of the equipment.
Inspection of the transmission bands.
Inspection to the wear of the auger back and front.
Wear inspection of the meat mixer.
Check of joint wear and locks on the mill lid.
Revision of the wear of the transmission and its components through observation and monitoring by means of the mechanical stethoscope.
Inspection of the connection plug and the power cord.
Maintenance to the aesthetics of the machine

Fish mill hobart

Inspection to the wear of the auger back and front.
Ignition control inspection.
Revision of the wear of the transmission and its components through observation and monitoring by means of the mechanical stethoscope.
Inspection of the motor by monitoring electrical current and mechanical stethoscope.
Maintenance to the aesthetics of the machine.

Meat slicers Hobart and Bizerba

Revision and correction to wear of cutting blade edge.
Revision and lubrication to the mechanism of advance and retreat for the cut.
Revision and lubrication to the lifting assembly for the thickness of cut.
Inspection of the cutting disc arrow bearings
Revision of the bases of the machine (legs).
Inspection to the ignition control system of the machine.
Inspection of the connection plug and power cord.
Inspection of the motor by monitoring electrical current and mechanical stethoscope.
Maintenance to the aesthetics of the machine.

Hobart erector

Review of heating elements for cutting and sealing.
Revision to the power supply wiring of the resistors.
Review of the operation of the thermostat.
Inspection of the operation of the machine's ignition timer.
Revision to the equipment connection box.
Inspection to Teflon protection for sealing.
Inspection of the connection plug and power cord.

Manual Vegetable Choppers

Check the wear of the cutting blades and possible replacement.
Inspection of equipment bumpers.
Pusher wear inspection.
General review of the equipment for possible cracks.

Chicken cutters

Inspection of the safety of the machine.
Inspection of the ignition assembly of the machine.
Inspection of the motor by monitoring electrical current and mechanical stethoscope.
Inspection of the connection plug and power cord.

Refrigeration Cases

Inspection and / or correction of lighting
Modifications or updates to the LED lighting system.
Repair of windows.
Hermetic sealing service for cases.
Service of cleaning and repair of the drains of the cases.
Replacement or installation of Sign holders.

Take your turn system (Turnomatic)

Inspection of system operation.
Device review or replacement.
Changes or repair of wireless or cable controls.

Kitchen Machines and Equipment

Industrial blender

Inspection of the blade and blender jar assembly.
Inspection to the transmission assembly of the machine.
Inspection of the motor performance of electric motor carbons bearing by visualization and monitoring of electric current.
Inspection of the connection plug and power cord.
Inspection of speed control and ignition.
Aesthetic maintenance of the machine

Carrot Juice Machines

Inspection of the assembly of knives and sieves.
Inspection to the transmission assembly of the machine.
Inspection of the motor performance of electric components by visualization and monitoring of electric current.
Inspection of the connection plug and power cord.
Control inspection and ignition.
Aesthetic maintenance of the machine.
Inspection of the gas discharge tube.

Orange Juice Machines

Inspection of the blade assembly of the machine
Inspection of the assembly of the mobile contact parts with the orange
Inspection of motor operation bearing electric components by visualization and monitoring of electric current
Inspection of the machine's securities
Lubrication cleaning to the mobile and fixed guides of the machine
Inspection of the connection plug and power cord
Control inspection and ignition

Turbo Moledor Robot Coupe

Inspection of knives and bearings of the bell.
Inspection of bearings and arrows through vibration and buzz.
Inspection of the motor performance of electric motor carbons bearing by visualization and monitoring of electric current.
Inspection of the connection plug and power cord
Review of microswitch wear and mechanical components of the ignition

Stove

Inspection and cleaning of the burners.
Inspection of the operation of the pilots.
Inspection to the wear of the hoses and regulator of gas.
Inspection of the gas valves of the burners and pilots.
Inspection of the valves for cleaning and aesthetic maintenance.

Stools

Inspection and cleaning of the burners.
Inspection of the operation of the pilots.
Inspection to the wear of the hoses and regulator of gas.
Inspection of the gas valves of the burners and pilots.
Review of valve manners.
Cleaning and aesthetic maintenance.

Irons

Inspection of gas supply hoses
Inspection of the operation of the burners.
Inspection to the automatic ignition system.
Review of valve manners.
Inspection of the connection plug and power cord.
Inspection of the operation of the thermostats.
Cleaning and aesthetic maintenance.

Warmer Case Henny Penny

Inspection of the connection plug and power cord.
Inspection of the resistance's operation.
Inspection of the operation of the resistance control Inspection of the air convection system fans
Inspection of the main contactor of the equipment Check the wear of the guides where the doors slide.
Cleaning service in the lower and upper connection box of the equipment.
Inspection of the lighting system and heating of the spotlights.

Warmer Hot Wells

Inspection the connection plug and power cord.
Inspection of the resistance's operation.
Inspection of the operation of the resistance control (thermostats).
Inspection of possible perforations and water leaks due to wear.
Inspection of the operation of the indicator lights.
Inspection and correction to the lighting system of the heating lights.

Warmer baul Henny Penny

Inspection of the connection plug and power cord.
Inspection of the resistance's operation.
Inspection of the resistance control operation.
Inspection of the air convection system fans.
Inspection of the main contactor of the equipment.
Review of the hinges and door locks.
Checking the seals and seals of the doors.
Cleaning service in the equipment connection box.

Fryers Henny Penny, Pitco and Imperial

Check the wear of the gas hoses.
Inspection of gas valves.
Inspection and cleaning of the burners.
Inspection to the automatic ignition system.
Inspection to the wear of the pot and possible oil leakage.

Rosticeras Henny Penny, Hard and Hobart

Service to the air convection system.
Inspection of control relays.
Service to the main contactor.
Service to electronic control cards.
Inspection to the electrical resistances by monitoring electric current.
Inspection to the power cord.
Cleaning the burners and ignition devices.
Inspection to the gas hose.
Inspection of hinged doors and locks.

Chicken Warmer

Review and monitoring of temperatures.
Inspection of the resistances by monitoring the current.
Inspection of the operation of the heat sources.
Inspection to the electrical power cord.
Maintenance to the main contactor.

Tortilleria

Tortilla Machine

Inspection of bearings in general using the mechanical stethoscope for possible and replacement
General lubrication of the joints and chains bearings
Inspection of the meshes and bands.
Inspection of the arrows and collars.
Maintenance to Comales and burners.
Pilot maintenance and flame sensor.
Inspection of gearmotors using the mechanical stethoscope and the measurement of electrical current.
Maintenance to speed drives.
Maintenance and revision to the control keypad.
Inspection of the power supply plug.
Inspection of the machine's securities.

Mass Feeding (Mass Feeder)

Maintenance to the speed controller
Maintenance to the control keypad.
Inspection of the reduction motor by mechanical stethoscope and measurement of electrical current.
Inspection of the power supply plug.
Inspection of the machine's securities.
Inspection of the door hinges.
Inspection of the lubrication chains and possible replacement depending on the mechanical elongation.

Flour Mixer

Maintenance of the control keypad.
Inspection of the reduction motor by means of mechanical stethoscope and measurement of electrical current Inspection of the power supply plug.
Inspection of the machine's securities.
Inspection of the door hinges.
Inspection of the lubrication chains and possible replacement depending on the mechanical elongation.
Lubrication and Inspection of the main hubs.

Mechanical Cooler

Review of cooling meshes.
Inspection of the discharge band.
Lubrication and inspection of the bearings by mechanical stethoscope.
Lubrication of the transmission chains.
Inspection and maintenance of the CD motor.
Maintenance and Inspection of the speed control keypad.
Inspection of the power supply plug.

General Machinery

Bailer (Cardboard Compactor)

Ignition control inspection and operation monitoring.
Revision to hinged doors and locks.
Inspection of security.
Inspection of the motor by measuring currents.
Inspection of hoses and hydraulic connections.
Inspection of the cylinder.
Inspection of the power cord.
Maintenance to the contactor box and keypad.
Review of hydraulic oil levels.

Trash compactor

Ignition control inspection and operation monitoring.
Revision to hinged doors and locks.
Inspection of the securities.
Inspection of the motor by measuring currents.
Inspection of hoses and hydraulic connections.
Inspection of the cylinder.
Inspection of the power cord.
Maintenance to the contactor box and keypad.
Review of hydraulic oil levels.
Lubrication of the pusher guides.

Water Heater

Inspection and maintenance of the air turbine.
Maintenance to the ignition device.
Inspection to the recirculation pump.
Level inspection and temperature control.

Drains

Service to the covered pipe.
Cleaning service by means of the jetter.
Maintenance to the clean up lids.
Strainer inspection, channel drain drain floor sink.

Plumbing

Preventive and corrective maintenance to urinal toilets sinks.
Maintenance to water faucets and three zinc hoses.
Compartments hand sink service keys and others.
Maintenance of sinks drains.

Doors

Maintenance repair and / or replacement of impact doors.
Maintenance repair and / or replacement of cooler doors.
Maintenance repair and / or replacement of office doors.
Installation and / or replacement of plastic curtains in coolers or accesses.

Floors

Installation and / or repair of epoxy floors.
Installation and / or repair of ceramic floors.
Installation and / or repair of VCT or Linolio floors.

Carpentry Service

Manufacture and repair of wooden furniture.
Manufacturing and repair of shelves (shelf).
Manufacture and repair of showcases.
Repair of bakery tables.

Exhaust Fan service

Inspection and / or replacement of the transmission bands.
Ball bearing inspection and lubrication.
Inspection and repair of the hinges.
Inspection and / or replacement of the engine.
Replacement or installation of complete units.

Swan Cooler service

Inspection and / or replacement of the transmission bands.
Ball bearing inspection and lubrication.
Inspection and / or replacement of water pumps.
Inspection and / or replacement of the engine.
Inspection and / or replacement of the grass.
Inspection and / or repair of the water distributor.
Replacement or installation of complete units.

Fat Trap Service

Cleaning service by jetter.
Service of absorption of fat.
Replacement or installation of complete units.

Design and Specialized Decoration

Specialized design of the département decoration.
3D design and decoration.
2D decoration design.
Maintenance of existing decorations in each store with identical colors based on a file backed from its construction.
Remodeling of decoration.
Design specific decoration and focused on each environment.
Design in rustic decorations.
Design in decorations for showcases and furniture.
Design in exterior and interior decoration.